SC-05 Microprocessor-based System Controller for the control of all kind of Gigahertz-Optik systems like integrating sphere sources, re-calibration test stands, etc.
Gigahertz-Optik manufactures electronic devices like lamp power supplies, stationary optometers and instrumentation that can be combined with other light measurement devices for complete application set-ups in the field of light measurement, optoelectronic component qualification and (OPM) optical properties of material testing. The modular concept of the 19” 3HE housings enables individual set-ups based on customers requirements. Electronic devices are installed into the BTS-19 series housings that are available in bench top or in rack mount style.
The SC-05 system controller is the central brain and master for all of Gigahertz-Optik higher complexity multiple component stand-alone systems. For manual control it offers a color touch-screen display supported with function buttons. For remote control operation it offers three different Interfaces enabling its simple control by PC or higher ranking systems in production, process and quality control set-ups. A software tool S-SDK-SC05 is available.
The device offers several features for integration into modular application set-ups:
- 32 bit microprocessor
- Six RS232 and two RS485 interfaces on rear panel for device control
- I/O interface on rear panel with four general inputs and outputs
- Flash memory for firmware and data processing
- SD card reader on front panel for increased data storage capacity and data transfer
- USB Host interface on front panel for temporary device connection, e.g. service related instruments
- 3.5” TFT display with touch panel as user interface for manual control
- RS232, USB and LAN interface for remote control operation
- Touchscreen for manual use
System controller for measurement and test systems.
Powerful microprocessor. Multiple Interfaces for appliance control. I/O Interface. Manual operation by touch screen display. Remote control via RS232, USB and/or Ethernet. Independent from Computer operating Systems.
Controller for manual and remote control of systems.
DC-Input: (7 – 25) VDC (500 – 100) mA
3.5” TFT Display 320x240 Pixel with Tochscreen
|Front panel control||
USB2.0 (Full Speed, HID device type)
4x (0 – 25) VDC
4x (open collector, max. 25V, max. 500mA)
operating: 5 °C to 40 °C
105mm x128 mm x126 mm
3HE x 21TE
|Produktname||Product Image||Description||Show product|
|BTH-19||Bench-top and rack housing for 3HE rack modules.
Features: The bench-top housings are available in half, third or full 19” widths. Power supply modules for (110-230) V, 50/60 Hz with low DC voltages for both external devices and those within the housing.
|BTS256-LED||Compact Bi-Tec measurement device for the measurement of total luminous flux of single LEDs.
Features: Cone-shaped measurement port with implemented integrating sphere, auxiliary lamp for substitution correction, spectral radiant power, color temperature, CRI, chromaticity coordinates, etc.
|LS-OK30-VAR-RS232||Variable aperture for use with lamp LS-OK30.
Features: High resolution stepping motor drive for remote control via RS232 interface.
|FWVA-170-6×2-RM||Filter change wheel with variable aperture for use with lamp LS-OK30.
Features: Up to six 2" dia filters High resolution variable apertur. Two stepping motor drives for remote control via RS232 interface.
|LPS-20||Precision LED power supply.
Features: With 1500mA current output at a maximum output current of 24V. The LPS-20 offers two 16-bit-D/A converters that allow precise current and voltage adjustment. Output current as well as output voltage can be measured using a high resolution ADC.
|LPS-100||Precision power supply for lamps up to 100W.
Features: PWM power supply for the precision operation of halogen or other lamps in constant current mode. The 16 bit D/A converter enables very accurate current setup and adjustment. For stress free switch on/off, the operation current is controlled with adjustable ramps.
|LPS-250||Precision power supply for lamps up to 250W.
Features: PWM power supply for the precise operation of halogen or other lamps in constant current mode. The 16 bit D/A converter enables very accurate current setup and adjustment. For stress free switch on/off, the operation current is controlled with adjustable ramps.