Modular detector
Some photometric application areas require measurement devices whose application potential is as flexible and diverse as possible. Through the PD-9304, Gigahertz-Optik offers a Si-photodiode detector for Laser power which can be modified for photometric and radiometric measurements using its exchangeable filters.
Si-photodiode detector
The high quality Si-photodiode of the PD-9304 has a 1cm² large photosensitive surface. Its spectral responsivity is calibrated in 10nm steps from 400 to 1100nm. This detector is thus ideal for measurement of monochromatic Radiation e.g. very low power Lasers .
Photometric detector
With the PD-93-VL exchangeable filters and the PD-93-COS diffuser window, the PD-9304 can be modified to form a photometric detector. The V(λ) matching of the luminous flux measurement head generally corresponds to the DIN-5032-T7 quality class B. Calibrations are also optionally offered.
Radiometric module detector
With the PD-93-RW exchangeable filter, the PD-9304 can be modified to form a radiometric detector for the spectral range between 400 and 1100nm. Calibrations are also optionally offered.
Use with all optometers
The detector can be combined with all optometers and light meters from Gigahertz-Optik.
Traceable calibration
The PD-9304 module detector can be calibrated in terms of its absolute spectral responsivity of the photodiode as well as the absolute illuminance and radiometric responsivity and relative spectral responsivity of the photodiode with add-on filter. Calibrations are performed by the Gigahertz-Optik calibration laboratory for optical radiation measurands. The calibrations are documented in an individually compiled calibration certificate. The design and contents of the calibration certificate are in accordance with the ISO 17025 specifications.



Specification | |||
Model | PD-9304 |
||
Sensor | Si-photodiode with 100 mm² (11.28 mmØ) photosensitive surface |
||
spectral responsivity | Si photodiode |
||
typical responsivity | 0.4 A/W @ 633nm |
||
Max. signal current | 1 mA |
||
temperature range | (5 - 40) °C |
||
Calibration | Spectral responsivity in A/W in 10 nm steps from 400 nm - 1050 nm |
||
Connector | BNC socket, 2m coaxial adapter cable, version –1, -2 and –4 plugs |
||
Housing | 37mmØ, 1.3/16-24-UNS front thread, lateral M6 and 1/4-20 bores |
||
min. signal current | depends on optometer |
||
Options | |||
Illuminance | PD-9304 with PD-93-VL and PD-93-COS |
||
Irradiance | PD-9304 with PD-93-RW |
Produktname | Product Image | Description | Show product |
---|---|---|---|
P-9710 | ![]() |
High-quality device for measurement of CW-, single pulse and modulated radiation. Features: Optometer for all detector heads with calibration data plug. Measurement modes: CW, pulse energy, dose, peak-to-peak, effective luminous intensity (Blondel-Rey), data logger, battery, main power, RS232 |
|
P-2000 | ![]() |
Two-channel optometer. Features: For use with most photometric and radiometric detectors supplied by Gigahertz-Optik. Modes: CW, pulse energy from both single and multiple flashes, effective luminous intensity (Blondel-Rey), data logger and others. |
|
P-9801 | ![]() |
Eight-channel optometer. Features: State-of-the-art 8 channel laboratory optometer with a signal amplifier and sample & hold ADC per channel for clocked recording of the measurement signals. RS232 and IEEE488 interface. Trigger input and output. |
|
P-9802 | ![]() |
Light meter for laboratory use with up to 36 measurement heads. Features: For use with up to 36 photometric and/or radiometric measurement heads. RS232 interface. |
|
P-9202-4 | ![]() |
Fast response time trans-impedance signal amplifier. Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage for short circuit operations. Bandwidths of up to 330kHZ. 1µs rise time. Large I-U amplification range from 10pA/V to 1mA/V. |
|
P-9202-5 | ![]() |
Universal trans-impedance signal amplifier. Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage (1mV) for short circuit photodiode operations. 5µs to 20ms rise time depending on the amplification. Large I-U amplification range – 1×10-10A/V to 1×10-3 A/V. |
|
P-9202-6 | ![]() |
Highly sensitive trans-impedance signal amplifier. Features: High quality analogue amplifier with current-voltage conversion with minimal diode offset voltage (0.5mV) for short circuit photodiode operation of . 2.5s to 25s rise time depending on the amplification. Large I-U amplification range – 1×10-11A/V to 1×10-4 mA/V. |