Integrating Sphere Detector
The ISD-3P-IGA integrating sphere detector employ a 30 mm diameter ODM98 coated integrating sphere with 5mm diameter measurement port. The unique collar baffle limits direct irradiation of the detector from dispersed light. The collar baffle enables optional detector ports to be added for additional detectors, fiber connectors or auxiliary use. The ISD-3P-IGA features an InGaAs photodiode detector for use in the spectral range from 800 to 1800nm spectral range.
Gigahertz-Optik’s synthetic ODM98 coating offers almost perfect hemispherical diffuse reflection for best light distribution inside the sphere.
Calibration of spectral radiant power sensitivity in W is performed in 10 nm steps from 800 to 1800 nm at Gigahertz-Optik’s Calibration Laboratory for Optical Radiation Quantities.
Calibration of spectral radiant power responsivity in A/W in 10 nm steps from 800 nm - 1800 nm
800 nm - 1800 nm radiometric
0.17E-04 A/W @ 1300 nm
0.20E-04 A/W @ 1550 nm
|max. Radiant Power (Peak)||
11.7 mW @ 1300 nm & 200 µA
10 mW @ 1550 nm & 200 µA
58.8 mW @ 1300 nm & 1 mA
50 mW @ 1550 nm & 1 mA
|max. Radiant Power (CW)||
may be limited by max. operation temperature
|Max. signal current||
5 mm Ø
(800 - 1800) nm
M6 threaded hole
coaxial cable 2 m Long, with BNC (-1), calibration data (-2) or ITT (-4) connector
(5 - 40) °C
|Produktname||Product Image||Description||Show product|
|P-9710||High-quality device for measurement of CW-, single pulse and modulated radiation.
Features: Optometer for all detector heads with calibration data plug. Measurement modes: CW, pulse energy, dose, peak-to-peak, effective luminous intensity (Blondel-Rey), data logger, battery, main power, RS232
|X1||Four-channel USB optometer designed for mobile use.
Features: Compact device for use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik. USB interface. Battery operation or power supply USB.
|X1-RM||Optometer in 3HE housing for use in 19” racks.
Features: Its USB and RS232 remote interface and two additional RS232 device interfaces make the device highly flexible when it comes to system integration. Its four signal inputs enable use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik.
Feature: The X1 optometer is available as a printed circuit board either with or without a housing and is suited for applications that do not require a keyboard or display. Four signal inputs enable connection with all measuring heads from Gigahertz-Optik.
Features: For use with most photometric and radiometric detectors supplied by Gigahertz-Optik. Modes: CW, pulse energy from both single and multiple flashes, effective luminous intensity (Blondel-Rey), data logger and others.
Features: State-of-the-art 8 channel laboratory optometer with a signal amplifier and sample & hold ADC per channel for clocked recording of the measurement signals. RS232 and IEEE488 interface. Trigger input and output.
|P-9802||Light meter for laboratory use with up to 36 measurement heads.
Features: For use with up to 36 photometric and/or radiometric measurement heads. RS232 interface.
|TR-9600||High-speed 1µs or 100ns rise time data logger optometer.
Features: Laboratory device for recording of clocked intensity progress readings in single light flashes, flash sequence or modulated light. Calculation of pulse data e.g. peak intensity, pulse length, pulse half width , pulse energy and pulse repeat rate, etc.
|P-9202-4||Fast response time trans-impedance signal amplifier.
Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage for short circuit operations. Bandwidths of up to 330kHZ. 1µs rise time. Large I-U amplification range from 10pA/V to 1mA/V.
|P-9202-5||Universal trans-impedance signal amplifier.
Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage (1mV) for short circuit photodiode operations. 5µs to 20ms rise time depending on the amplification. Large I-U amplification range – 1×10-10A/V to 1×10-3 A/V.
|P-9202-6||Highly sensitive trans-impedance signal amplifier.
Features: High quality analogue amplifier with current-voltage conversion with minimal diode offset voltage (0.5mV) for short circuit photodiode operation of . 2.5s to 25s rise time depending on the amplification. Large I-U amplification range – 1×10-11A/V to 1×10-4 mA/V.