This Product is discontinued, please contact us if you are still interested. An alternative is e.g:

Modular light detectors are designed to be combined with optics and mechanical components to configure complete light detection assemblies for a specific light measurement application. A mechanical interface is provided to make mounting or adding other components easy and flexible.

Photometric Detector for use with Compact Integrating Spheres

The VL-11 series detectors with a diameter of only 11mm are compact in size and fit the DP-11 interface directly or can be mounted to most Gigahertz-Optik integrating spheres using an adapter. The VL-1101 is a modular photometric detector with an accurate CIE V(λ) spectral match. It is most commonly used with integrating spheres for total flux measurements or as monitor detector on integrating sphere light sources.

Front Lens Adapter for Luminance Measurements

The application range of the VL-1101 detector can be extended for luminance measurement using the add-on PD-11Z-01 front lens.

Traceable Calibration

Optional calibration is available by Gigahertz-Optik’s Calibration Laboratory for Optical Radiation Quantities.

 

Specification
spectral responsivity

photometric V(λ)

f1'

f1 ≤ 5 %

typical responsivity

0.3 nA/lx

Max. signal current

1 mA

Input optics

1.1 mm Ø si-photodiode behind correction filter

Connector

coaxial cable 2m Long, with BNC (-1), calibration data (-2) or ITT (-4) connector

temperature range

(5 - 40) °C

min. signal current

depends on optometer

Type Description File-Type Download
Datasheet VL-1101 PDF
Produktname Product Image Description Show product
P-9710 High-quality device for measurement of CW-, single pulse and modulated radiation.

Features: Optometer for all detector heads with calibration data plug. Measurement modes: CW, pulse energy, dose, peak-to-peak, effective luminous intensity (Blondel-Rey), data logger, battery, main power, RS232
X1 Four-channel USB optometer designed for mobile use.

Features: Compact device for use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik. USB interface. Battery operation or power supply USB.
X1-RM Optometer in 3HE housing for use in 19” racks.

Features: Its USB and RS232 remote interface and two additional RS232 device interfaces make the device highly flexible when it comes to system integration. Its four signal inputs enable use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik.
X1-PCB Optometer module.

Feature: The X1 optometer is available as a printed circuit board either with or without a housing and is suited for applications that do not require a keyboard or display. Four signal inputs enable connection with all measuring heads from Gigahertz-Optik.
P-2000 Two-channel optometer.

Features: For use with most photometric and radiometric detectors supplied by Gigahertz-Optik. Modes: CW, pulse energy from both single and multiple flashes, effective luminous intensity (Blondel-Rey), data logger and others.
P-9801 Eight-channel optometer.

Features: State-of-the-art 8 channel laboratory optometer with a signal amplifier and sample & hold ADC per channel for clocked recording of the measurement signals. RS232 and IEEE488 interface. Trigger input and output.
P-9802 Light meter for laboratory use with up to 36 measurement heads.

Features: For use with up to 36 photometric and/or radiometric measurement heads. RS232 interface.
TR-9600 High-speed 1µs or 100ns rise time data logger optometer.

Features: Laboratory device for recording of clocked intensity progress readings in single light flashes, flash sequence or modulated light. Calculation of pulse data e.g. peak intensity, pulse length, pulse half width , pulse energy and pulse repeat rate, etc.
P-9202-4 Fast response time trans-impedance signal amplifier.

Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage for short circuit operations. Bandwidths of up to 330kHZ. 1µs rise time. Large I-U amplification range from 10pA/V to 1mA/V.
P-9202-5 Universal trans-impedance signal amplifier.

Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage (1mV) for short circuit photodiode operations. 5µs to 20ms rise time depending on the amplification. Large I-U amplification range – 1×10-10A/V to 1×10-3 A/V.
P-9202-6 Highly sensitive trans-impedance signal amplifier.

Features: High quality analogue amplifier with current-voltage conversion with minimal diode offset voltage (0.5mV) for short circuit photodiode operation of . 2.5s to 25s rise time depending on the amplification. Large I-U amplification range – 1×10-11A/V to 1×10-4 mA/V.
UPB-150-ART Integrating sphere for universal use in reflection and transmission application.

Features: 150 mm/6" dia. 5 application ports. BaSO4 coating, Precise port alignment and uniform knife-edges because of CNC machined housing. Optional accessories.

UPB-150-ARTA Integrating sphere for universal use in reflection, transmission and absorption application.

Features: 150 mm/6" dia. 5 application ports. BaSO4 coating, Sheet and cuevette sample holder. Precise port alignment and uniform knife-edges because of CNC machined housing. Optional accessories.
UMPA-0.5/11 Port adapter for use with UMPF-0.5 port frame of the UM series modular construction integrating spheres.

Features: To attach TD-11, PD-11 or VL-11 detectors and UFC-11 fiber connectors. Optional diffuser window.
UPK-30-L Integrating spheres with precise machined housings.

Features: 1.18 in / 30 mm dia sphere. 5mm dia measurement port. Detector port. 98% synthetic coating.

UPK-50-L Integrating spheres with precise machined housings.

Features: 2 in / 50 mm dia sphere. 10 mm dia measurement port. Detector port. 98% synthetic coating.

UPK-100-L Integrating spheres with precise machined housings.

Features: 4 in / 100 mm dia sphere. 15 mm dia measurement port. Detector port. 98% synthetic coating.

Article-Nr Modell Description Request / Compare
Product
101242 VL-1101-1

Detector with –1 connector, no calibration certificate

101710 VL-1101-2

Detector head with –2 connector, no calibration certificate

15297135 VL-1101-4

Detector head with –4 connector, no calibration certificate

Product tags


Similar products