Cost Effective Application Solution
The MD-37 series are designed as modular light detectors to be combined with optics, filters and mechanical components to configure complete light detection assemblies. Their mechanical interface makes mounting or adding other components easy and flexible.
M30x1 Threaded Interface
The MD-37 series detectors are designed with a M30x1 metric thread interface on the front end. The M30x1 is a common thread size in optics applications.
Wide Selection on Photodiode Types
The MD-37 detectors are available with different photodiodes from the ultraviolet to the near infrared wavelength range.
Custom Photodiode Configuration
A universal printed circuit board design allows other types and size photodiodes to be assembled into MD-37 detector housings.
Accessories with M30x1 Interface
For common light measurement applications Gigahertz-Optik GmbH offers the SRT-M37 series accessories with M30x1 thread interface for use with MD-37 detectors.
Optional calibration is available through Gigahertz-Optik’s Calibration Laboratory for Optical Radiation Quantities.
MD-37 Detector housing with printed circuit board and cable for custom design set-ups
Front adapter 7mm long for MD-37 detector. Useful with filters from 0.5 to 1 in diameter
Front cap for MD-37 detector. 8mm hole.
Front cap for MD-37 detector. 11mm hole.
Front cap for MD-37 detector with 11mm dia. RADIN diffuser
Universal front adapter for MD-37 detector with axial hole specified from 1 mm to 25mm. Useful for mounting fiber bundles and other optics.
Front tube for MD-37 detector with 37mm dia. and 50mm length.
Lens adapter for MD-37 type detector heads. Powerful 50mm diameter f50 double-convex lens with MgF2 AR coating. M30x1mm male thread interface with aperture insert. Field of view can be specified based on detector active area.
Front lens with 1° field of view. Needs SRT-M45/37B to couple with MD-37 detector. 0.7 mm diameter hole aperture
Front lens with 2° field of view. Needs SRT-M45/37B to couple with MD-37detector. 1.4 mm diameter hole aperture
Front lens with 5° field of view. Needs SRT-M45/37B to couple with MD-37 detector. 3.4 mm diameter hole aperture
Front lens with 10° field of view. Needs SRT-M45/37B to couple with MD-37 detector. 7 mm diameter hole aperture
Flexible rubber ambient light shade for use on SRT-M37-L lenses or the SRT-M37-50 tube.
|Produktname||Product Image||Description||Show product|
|P-9710||High-quality device for measurement of CW-, single pulse and modulated radiation.
Features: Optometer for all detector heads with calibration data plug. Measurement modes: CW, pulse energy, dose, peak-to-peak, effective luminous intensity (Blondel-Rey), data logger, battery, main power, RS232
Features: For use with most photometric and radiometric detectors supplied by Gigahertz-Optik. Modes: CW, pulse energy from both single and multiple flashes, effective luminous intensity (Blondel-Rey), data logger and others.
Features: State-of-the-art 8 channel laboratory optometer with a signal amplifier and sample & hold ADC per channel for clocked recording of the measurement signals. RS232 and IEEE488 interface. Trigger input and output.
|P-9202-4||Fast response time trans-impedance signal amplifier.
Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage for short circuit operations. Bandwidths of up to 330kHZ. 1µs rise time. Large I-U amplification range from 10pA/V to 1mA/V.