This Product is discontinued, please contact us if you are still interested. An alternative is e.g:

Fast Rise Time Integrating Sphere Detector

The ISD-0.8P-SiLP integrating sphere detector employs an 8 mm diameter ODM coated integrating sphere. The small diameter integrating sphere ensures high light level throughput through low attenuation as well as a fast light throughput by short transit time of the light signal (speed of light divided by the product of sphere diameter and sphere factor).

Fast Rise Time Photodiode

The low profile Si photodiodes (identical to model PD-1106) offer fast rise time for longer wavelengths as compared to crystalline type silicon photodiodes.

Measurement Port or Fiber Adapter 

An UFC-11/SMA fiber connector adapter can be mount to the ISD-0.8P-SiLP integrating sphere detector’s measurement port. 

Traceable Calibrations 

Calibration of spectral radiant power sensitivity in W is performed at Gigahertz-Optik’s Calibration Laboratory for Optical Radiation Quantities.

Typical Spectral Responsivity
Sensor design
Calibration
Calibration

Calibration of integral radiant power responsivity in A/W

Specification
spectral responsivity

(400 - 1100) nm radiometric

typical responsivity

33 mA/W @ 633 nm

46 mA/W @ 900 nm

max. Radiant Power (Peak)

30 mW @ 633nm & 1 mA

20 mW @ 900nm & 1 mA

max. Radiant Power (CW)

may be limited by max. operation temperature

Max. signal current

1 mA

Input optics 2 mm Ø
Sphere diameter

8 mm

Coating synthetic ODM98
Mounting

M6 threaded hole

Sensor PD-1106
Miscellaneous
Connector

coaxial cable 2 m Long, with BNC (-1), calibration data (-2) or ITT (-4) connector

temperature range

(5 - 40) ° C

Type Description File-Type Download
Datasheet ISD-0.8-SiLP PDF
Produktname Product Image Description Show product
TR-9600 High-speed 1µs or 100ns rise time data logger optometer.

Features: Laboratory device for recording of clocked intensity progress readings in single light flashes, flash sequence or modulated light. Calculation of pulse data e.g. peak intensity, pulse length, pulse half width , pulse energy and pulse repeat rate, etc.
P-9202-4 Fast response time trans-impedance signal amplifier.

Features: High quality analogue amplifier with current-voltage conversion. Minimal diode offset voltage for short circuit operations. Bandwidths of up to 330kHZ. 1µs rise time. Large I-U amplification range from 10pA/V to 1mA/V.
P-9710 High-quality device for measurement of CW-, single pulse and modulated radiation.

Features: Optometer for all detector heads with calibration data plug. Measurement modes: CW, pulse energy, dose, peak-to-peak, effective luminous intensity (Blondel-Rey), data logger, battery, main power, RS232
Article-Nr Modell Description Request / Compare
Product
15298318 ISD-0.8-SiLP-1 Detector head with -1 connector, calibration certificate
Re-calibration
15300249 K-ISDSi-SD

Re-calibration of radiant power responsivity in A/W with calibration certificate

15300580 K-Si-SR

Re-calibration of the relative spectral responsivity

Accessories
100929 UFC-11-SMA

SMA connector