X911
X911µ
The X911 (Xnine seven) meter in combination with the optional UV-3718-4 detectors forms a compact hand-held radiometer for the measurement of irradiance and irradiance dose of monochromatic optical radiation at 254nm.
Measurement of UV-C254nm irradiance of low pressure mercury lamps used in germicidal & bactericidal sterilization and eprom eraser
The UV-3718-4 detector is designed for the measurement of high intensity ultraviolet radiation at 254nm. For long time stable operation with short wavelength high energy radiation the detectors diffuser, its band pass filter and photodiode are pre-aged by UV radiation. Beside that the front of the detector and its cable are protected with stainless steel plate and stainless steel spiral tube.
Simple to Use Lightmeter
The X911 meter is a handheld battery operated meter with 9 mm high character LCD display for easy viewing. It offers a wide dynamic amplifier with seven automatically or manually selected gain ranges. Operating the X911 is simple you only need to switch on the meter and select the measurement mode. The meter is operated by a standard 9V battery. An BHO-11 hard-shell case is optional available.
Two meter versions are offered:
X911 with display in mW/cm²
X911u with display in µW/cm²
Traceable Calibration
The detector and the meter are traceable calibrated to international standards.
Custom Labeling Welcome
X911 and X911u UV-C Irradiance Meter
UV-3718-4 Irradiance Detector
UV-3718-4 Typical Spectral Responsivity
Specifications
| Meter | Compact size hand-held housing |
| Display | 6 character LCD, Character height 9mm. Indication of measurement quantity, cw or peak measurement mode, automatic or manual gain, run/stop, low battery |
| Detector interface | ITT (-4) type connector |
| Measurement modes | |
| CW | With Run / Hold function (Snapshot) |
| CW integration time | 300 ms |
| Frequency Range | 0.166 Hz to >300MHz |
| Dose measurement | Manual controlled with RUN / STOP buttons |
| Dose integration time | 100 ms |
| Parameter adjustment | Via RS232 interface |
| Front panel control | 3 button system |
| Interface | RS232, 9600 Baud, 8 8D pin plug Hirose type 3260-8S1, Power supply option recommended for remote control operation |
| Temperature | Operating: 5 to 40°C, storage: -10 to 50° C |
| Size / weight | 120mm x 65mm x 22mm / 150g |
| Power supply | 9V one-piece battery, operating time about 100 hrs Operation from AC plug-in power supply 230V/50Hz on option by erase of battery |
| UV-3718-4 Detector | For detail information please check the UV-3718 datasheet |
| Irradiance Range | With X911 0.002 to 8000mW/cm²
With X911u 2 to 999999 µW/cm² |
| Irradiance Dose Range | With X911 0.05 to 999999 J/cm²
With X911u 50 to 999999 mJ/cm² |
| Size / weight | 37mm diameter, 32mm height, 12mm cosine diffuser diameter, 2m cable length, 100 g |
| Calibration | With monochromatic reference light source at 254nm |
| Environmental | |
| CE conformity | The device conforms with the requirements set out in the council directive on the approximation of the laws of the member states relating to electromagnetic compatibility (89/336/EEC). For the evaluation regarding electromagnetic compatibility, the following standards were applied: EN 61326-1 - Class B |
| RoHS | Compatible |
| Warranty | 12 month |
schließen
X911 Accessory
X9-Z01
RS232 interface adapter cable to connect X9 meters with 9PIN SUB-D standard sockets on PCs
X9-Z02
External power supply unit for X9 meters including meter modification (cancels battery operation)
schließen
Purchasing Information
| Model | Item No.: | Description |
| X911 | 100559 | Meter (mW/cm²)with battery and manual |
| X911u | 102534 | Meter (µW/cm²)with battery and manual |
| X911uSet | 102665 | Meter X911u, detector UV-3718-4, case BHO-11, battery and manual |
| UV-3718-4 | 101843 | UV-C (254nm) irradiance detector; Calibration certificate |
| Accessory | ||
| X9-Z01 | 100065 | RS232 interface adapter cable to connect X9 series meters with 9PIN SUB-D standard sockets to PCs |
| X9-Z02 | 100299 | External power supply for X9 series meters including meter modification (cancels battery operation) |
| X9-Z05 | 101122 | Plug-in power supply for AC operation of X9 series meters. Connects to RS232 socket of the meter (prevents remote control operation via RS232 interface). 100VAC - 240VAC; 5VDC |
| BH0-11 | 102233 | Hard case to carry and store the X9-11 with one UV-3718-4 |
| Re-calibration | ||
| K-X9n-C | 301328 | Electronic calibration of X9 series meters |
| K-UV3718-S | 301298 | Irradiance calibration using monochromatic reference source at 254nm, Calibration certificate |
schließen
Diese Seite drucken